Shop All

Maxi-Seal Seam Sealer Grey 10.5 oz.

Maxi-Seal Seam Sealer Grey 10.5 oz. Plug Leaks, Gaps, and Cracks with Confidence: Maxi-Seal Polyurethane Seam Sealer tackles even the toughest auto body repair challenges. This thick, single-component formula easily patches large cracks and provides...

Maxi-Seal Seam Sealer White 10.5 oz.

Maxi-Seal Seam Sealer White 10.5 oz. Plug Leaks, Gaps, and Cracks with Confidence: Maxi-Seal Polyurethane Seam Sealer tackles even the toughest auto body repair challenges. This thick, single-component formula easily patches large cracks and provides...

Milton S-716 1/4" Male Body M-Style Quick Change Coupler (Each) EA

Milton M-style "Kwik-change" plugs will interchange with all manufacturers who comply with the dimensional requirements of military specification MIL-C-4109. Features: 1/4in Male Body inMin Style M-style coupler bodies are brass with brass sleeves...

Milton S-719 M-Style Coupler 3/8" MNPT (Each) EA

Milton S-719 M-Style Coupler 3/8" MNPT (Each) Maximum inlet pressure: 300 PSI Maximum temperature: 250°F Air Flow: 40 SCFM @ 100 PSI Seals: Buna N

Milton S-727 1/4" M-Style Plugs MNPT (2/Pk) EA

Milton S-727 1/4" M-Style Plugs MNPT (2/Pk) 1/4" male national pipe thread Maximum inlet pressure of 300 pounds per square inch Maximum air flow of 40 standard cubic feet per minute Maximum temperature of 250 degrees Fahrenheit Made in USA The Industry...

Milton S-728 1/4" M-Style Plugs FNPT (2/Pk) EA

Milton S-728 1/4" M-Style Plugs FNPT (2/Pk) 1/4" female national pipe thread Maximum inlet pressure of 300 pounds per square inch 40 standard cubic feet per minute Maximum temperature of 250 degrees Fahrenheit Made in USA The Industry Standard M Style...

Mirka 1353-150 150 Grit 4-Side Sanding Sponges Gray 10/Pack

Mirka 1353-150 150 Grit 4-Side Sanding Sponges Gray 10/PackA sanding sponge with abrasive on four sides. This sponge will outlast sandpaper and they are perfect for stripping old finishes. Ideal for sanding contours by hand. Box of 10. Sponge size -...

Mirka 18-111-447 6" x 9" Mirlon Alum Ox Resin Scuff Pad (Each)

Mirlon is a flexible, 3 dimensional fiber sanding material that is easy to use on profiled surfaces and produces an excellent finish. It is ideal for matting of surfaces and creates an excellent base for the next lacquer layer. 3 dimensional structure...

Mirka 18-111-448 Mirlon 6" x 9" Ultra Fine Scuff Pads Gray (20 Box)

Mirka 18-111-448 Mirlon 6" x 9" Ultra Fine Scuff Pads Gray (20 Box)Mirlon is a flexible, three-dimensional fiber sanding material that's easy to use on profiled surfaces and produces an excellent finish. It's ideal for matting of surfaces and...

Mirka 18-111-448 Mirlon 6" x 9" Ultra Fine Scuff Pads Gray (Each)

Mirka 18118448 Mirlon Total 4.5" x 9" Gray Scuff Pads Ultra Fine Grit 25/Box

Mirka 18118448 Mirlon Total 4.5" x 9" Gray Scuff Pads Ultra Fine Grit 25/Box Miraka Abrasives Marlon Total 4.5" x 9" Scuff Pads, Ultra Fine (1500 Grit) Marlon Total has been developed using Miraka innovative Total Coating Technology. The new technology...

Mirka 23-379-080 6" 80 Grit PSA Autobox Discs 100/Box

Mirka 23-379-080 6" 80 Grit PSA Autobox Discs 100/Box Mirka Gold is a durable product very well suited for sanding at high speeds. Gold is an all-round sanding material that can be used for many purposes. In order to achieve an optimal sanding result,...

Mirka 23-612-120 5" 120 Grit Gold Grip Disc 50/Box

Mirka 23-612-120 5" 120 Grit Gold Grip Disc 50/Box Mirka Gold is a durable product very well suited for sanding at high speeds. Gold is an all-round sanding material that can be used for many purposes. In order to achieve an optimal sanding result, the...

Mirka 23-612-180 5" 180 Grit Gold Grip Disc 50/Box

Mirka 23-612-180 5" 180 Grit Gold Grip Disc 50/Box Mirka Gold is a durable product very well suited for sanding at high speeds. Gold is an all-round sanding material that can be used for many purposes. In order to achieve an optimal sanding result, the...

Mirka 23-612-220 5" 220 Grit Gold Grip Disc 50/Box

Mirka 23-612-220 5" 220 Grit Gold Grip Disc 50/Box Mirka Gold is a durable product very well suited for sanding at high speeds. Gold is an all-round sanding material that can be used for many purposes. In order to achieve an optimal sanding result, the...

Mirka 9193500111 Black Dry Guide Coat 100g

Mirka 9193500111 Black Dry Guide Coat 100g • The most efficient way to highlight imperfections and scratches in polyester fillers and primers.• A great tool for guiding the operator through the sanding process in order to achieve a perfect...

Motor Guard HT-1 Block Buster Sanding Block EA

Motor Guard HT-1 Block Buster Sanding Block This unique dual-sided block sands areas where ordinary hard blocks are not adequate. Exclusive “Hole” side acts like a grater and cuts 30% faster than standard hard blocks.

Motor Guard J20015 Magna-Spot Draw Pins with Striker Tip 2.5 mm 500/Pack

Motor Guard J20015 Magna-Spot Draw Pins with Striker Tip 2.5 mm 500/Pack2.5mm DiameterSteel with copper coatingEasy weld for quick pullingStrong and flexibleMade in USA

Motor Guard M-30 Submicronic Compressed Air Filter 1/4 NPT (Each)

Motor Guard M-30 Submicronic Compressed Air Filter 1/4 NPT  Motor Guard Sub-Micronic Compressed Air Filters are the ultimate defense against damaging, dirty air. Designed for installation at to the point of use, these filters remove particulates,...

Motor Guard M-723 Replacement Air Filter Element Each

Motor Guard M-723 Replacement Air Filter ElementDescription:Air Filter ElementItem Filter ElementUsed On Item M-30/M-60 Air Filter

Motor Guard SB-1 Soft Block Sanding Block Each

Motor Guard SB-1 Soft Block Sanding Block Motor Guard original dual-sided sanding Block. This unique sanding Block utilizes two different densities to achieve the ultimate in block sanding of curved or irregular shaped surfaces. The original Motor Guard...

Motor Guide J20014 Magna-Spot Draw Pins w Striker Tip 2 mm (500/Pack) BX

Motor Guide J20014 Magna-Spot Draw Pins w Striker Tip 2 mm (500/Pack) Motor Guard Magna-Spot Draw Pins made of copper-coated steel are soft for easy flexing and grinding but deliver a 500 lb. pull. Packaged in a convenient, re-closable clamshell package...

Norton 06230 6" 320 Grit Gold Reserve Norgrip (50/Pack)

Norton 06230 6" 320 Grit Gold Reserve Norgrip (50/Pack) P-graded premium aluminum oxide abrasive Hook and Loop attachment P320 Grit

Norton 06243 6" 80 Grit Dry Ice Multi-Air NorGrip Ceramic Discs 50/Box

Norton 06243 6" 80 Grit Dry Ice Multi-Air NorGrip Ceramic Discs 50/Box Dry Ice is perfect for refinishing any job, especially those that require an extremely durable abrasive that cuts quick, cuts cooler, and lasts longer without generating heat. Our...

Norton 06246 6" 180 Grit Dry Ice Multi-Air NorGrip Ceramic Discs 50/Box

Norton 06246 6" 180 Grit Dry Ice Multi-Air NorGrip Ceramic Discs 50/Box Dry Ice is perfect for refinishing any job, especially those that require an extremely durable abrasive that cuts quick, cuts cooler, and lasts longer without generating heat. Our...

Norton 62318 2" 36 Grit Blaze Speed-Lok Grinding Discs 25/Box

Norton 62318 2" 36 Grit Blaze Speed-Lok Grinding Discs 25/Box Norton SG Blaze self-sharpening design is ideal for high pressure, heavy metal removal applications. The engineered, laminated backing is extremely durable for the most rugged applications.

Norton Gold Reserve 06231 6" P220 Grit A296 Series NorGrip Aluminum Oxide Sanding Discs 50/Roll

Norton Gold Reserve 06231 6" P220 Grit A296 Series NorGrip Aluminum Oxide Sanding Discs 50/Roll A great tool for blending, finishing, paint removal and sanding projects involving painted or primed materials, this Gold Reserve A296 fine grit paper PSA...

Norton Gold Reserve 06234 6" P120 Grit A296 Series NorGrip Aluminum Oxide Sanding Discs 50/Roll

Norton Gold Reserve 06234 6" P120 Grit A296 Series NorGrip Aluminum Oxide Sanding Discs 50/Roll A great tool for blending, finishing, paint removal and sanding projects involving painted or primed materials, this Gold Reserve A296 fine grit paper PSA...

POR 15 1QS Silver Rust Preventive Coating Quart QT

POR 15 1QS Silver Rust Preventive Coating Quart POR-15 Rust Preventive Coating is sensitive to UV light and must be topcoated when prolonged exposure to sunlight is possible. Topcoating is not required for areas not exposed to sunlight. For easier clean...

POR 15 40104 Cleaner Degreaser Quart

POR 15 40104 Cleaner Degreaser Quart • Easy to use water-based industrial strength multi-purpose cleaner• Fast-acting• Can be diluted 1:1 up to 10:1 with water• Unlimited shelf-life• Broad materials and surface...

POR 15 45004 Gloss Black Rust Preventive Coating Quart QT

POR 45004 15 Gloss Black Rust Preventive Coating Quart POR-15 Rust Preventive Coating is a high performance coating designed for application directly on prepped rusted or seasoned metal surfaces and will stop rust permanently. POR-15 Rust Preventive...

POR 15 45901 Top Coat Chassis Black Gallon

POR 15 45901 Top Coat Chassis Black Gallon POR-15 Top Coat is a direct-to-metal coating designed to work incredibly well in all application where there is a need to preserve substrates susceptible to corrosion. Uner exposure to sunlight and weather...