Product Description

Awlcraft T0001 Fast Evaportating Reducer for Spraying Gallon

Use T0001 in Awlgrip/Awlcraft 2000/Awlcraft SE Topcoats when application and cure temperatures are between 60-75°F (16-24°C). At 60-75°F (16-24°C), T0001 will keep the paint film open for good flow but evaporate fast enough to provide adequate dry and dustfree times.

All of the listed reducers for Awlgrip, Awlcraft 2000 and Awlcraft SE Topcoats can be blended with each other in any ratio to fine tune flow and evaporation rates. Most Awlgrip and Awlcraft 2000 Topcoats recommend up to 25% reduction. The reduction percentage is calculated from the combined total of the base component and converter component. Mixing a quart of base and a quart of converter yields 2 quarts of mixed base and converter: 25% would be 1/2 quart of reducer. Examples of total mix quantities for 1:1 and 2:1 base to converter ratios are as follows: 1:1 mix materials Awlgrip Topcoat Spray, 545 Primer, etc. Reduction: 25% Color Base 12 oz. Converter 12 oz. Reducer 6 oz. Total Mix 30 oz. 2:1 mix materials: Awlgrip Topcoat Brush (10-33% reduction), Awlcraft 2000 Topcoat Spray (up to 25% reduction) Reduction: 25% 30% 33% Color Base 12 oz. 12 oz. 12 oz. Converter 6 oz. 6 oz. 6 oz. Reducer 4.5 oz. 5.5 oz. 6 oz. Total Mix 22.5 oz. 23.5 oz. 24 oz. At higher temperatures, reducers evaporate faster. When painting in hot conditions increasing the amount of reducer in the mix by 510% will help compensate for this factor.